Home Professional Sound System Line Array Speaker System SW-2
Line Array Speaker System SW-2

The POPE Professional Sound Wave Series SW-2 Line Array Speaker system took our engineers more than 2 years to develop and fine tune to provide the best audio quality and to attain high SPL of each cabinet. Every component was designed from ground up and all manufactured in-house using current state-of-the art processes. To get better performance from each component, it is designed to work only within its frequency band which improves efficiency and power output. The system also includes integrated flying hardware to ease the flying of the system. It should take no longer than 30 minutes to fly 24 cabinets with our patented flying system.

Features

Sound Wave Series SW-2, 3-way Line Array cabinet utilizes dual 15"LMF drivers, dual 10" HMF drivers and dual 1.75" HF compression drivers. The HMF and HF transducers are integrated in an amalgamated horn (AIH) design to provide long throw and smooth coverage. The SW-2 is suitable for outdoor tour sound application and also used in very large indoor venue, where high SPL is required. The SW-2 system works with L-8A dual 18" long throw horn loaded sub-woofer.

Application
  • Live sound open-air venues, arenas, concerts
  • Fixed installations multi-purpose auditoria, sports venues etc..
AIH Design for SW 2
 

Cross Section of SW-2
 
Specifications

 

Line Array Element

Model

SW-2

Frequency Response (3dB)

50Hz-20kHz

Frequency Range (-10dB)

48Hz-20kHz

Horizontal Coverage Angle (-5dB)

90 deg. norminal (220Hz - 20kHz)

Vertical Coverage Angle (-5dB)

Varies with array size and configuration

Maximum Peak Output

138 dB

Recommended Signal Processing

POPE Professional DSP 3060 or DSP 4080

Transducer Sections

Low Mid Frequency

2 x 15" Dia POPE Professional Low Mid Speakers with 100 mm Voice Coil

Bandpass Nominal Impedance

8 ohms each driver

Power Rating

2 x 500 Watts Continuous. Pink Noise 2 hours
2 x 1000 Watts Program
2 x 2000 Watts Peak

Mid Frequency

2 x 10" Dia POPE Professional Mid Speakers with 75 mm Voice Coil

Bandpass Nominal Impedance

8 ohms each driver

Power Rating

2 x 250 Watts Continuous. Pink Noise 2 hours
2 x 500 Watts Program
2 x 1000 Watts Peak

High Frequency

2 x 44 mm Titanium diaphragm, 1.75" throat diameter Compression drivers

Band pass Nominal Impedance

8 ohm

Power Rating

2 x 80 Watts Continuous. Pink Noise 2 hours
2 x 160 Watts Program
2 x 320 Watts Peak

Enclosure

Box Construction

Wedge frustum 5 degree side angle enclosure

Finish

Black Lacquer

Connections

One Weipu 7 pin connector

Dimensions (Hx Wx D)

472 x 763 x 1366 mm

Weight

112 kg ( 246.8 lb)

 

 
Designed by vonfio.de